sales@szcinty.com
Product overview
- Part Number
- 395-062-541-503
- Manufacturer
- EDAC
- Product Category
- Standard Card Edge Connectors
- Description
- Standard Card Edge Connectors .100" (2.54mm) Pitch Card Edge Connector
Documents & Media
- Datasheets
- 395-062-541-503
Product Attributes
- Series :
- 395
Description
Standard Card Edge Connectors .100" (2.54mm) Pitch Card Edge Connector
Price & Procurement
Associated Product
You May Also Be Interested In
| Part | Manufacturer | Stock | Description |
|---|---|---|---|
| PC425AP-10-DA | Amphenol Wilcoxon | 3,000 | Accelerometers Side exit, same as PC425 standard unit w/ addition of an output signal for Acceleration, Equivalent Peak, 10 g (98 m/sec2), Dynamic Acceleration -100 mV/g, (10.2 mV/m/sec2). |
| PC425VR-05-DA | Amphenol Wilcoxon | 3,000 | Accelerometers Side exit, same as PC425 standard unit w/ addition of an output signal for Velocity, RMS, 0.5 ips (12.7 mm/sec), Dynamic Acceleration -100 mV/g, (10.2 mV/m/sec2). |
| PC425AP-05-DV | Amphenol Wilcoxon | 3,000 | Accelerometers Side exit, same as PC425 standard unit w/ addition of an output signal for Acceleration, Equivalent Peak, 5 g (49 m/sec2), Dynamic Velocity 100 mV/ips, (3.94 mV/mm/sec). |
| 797L-33 | Amphenol Wilcoxon | 3,000 | Accelerometers Side exit, 0.2 Hz low frequency, IsoRing, 500 mV/g, 5% sensitivity tolerance, MIL-C-5015 connector |
| 797L-31 | Amphenol Wilcoxon | 3,000 | Accelerometers Side exit, 0.2 Hz low frequency, IsoRing, 500 mV/g, 5% sensitivity tolerance, MIL-C-5015 connector |
| 797LE | Amphenol Wilcoxon | 3,000 | Accelerometers Side exit, 0.2 Hz low frequency, IsoRing, 500 mV/g, 5% sensitivity tolerance, MIL-C-5015 connector |
| 376E | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, high temp 260C, replacement sensor for Intrinsically Safe charge amplifier system 376E/CC726E, cable limit 100 |
| 797LT | Amphenol Wilcoxon | 3,000 | Accelerometers Side exit, 0.2 Hz low freq, IsoRing, case isolated, dual output (500 mV/g) with temperature, MIL-C-5015 connector, 5% sensitivity tolerance |
| PC420ATP-05-B3223 | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, same as PC420Axx unit except output signal is frequency banded to trend 300 Hz to 2 kHz only. Non-standard product. |
| 793R | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, radiation-resistant piezoelectric, case isolated, MIL-C-5015 connector, 100 mV/g, +/-5% sensitivity tolerance |
| 766E | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, high frequency, case isolated, 100 mV/g, 10% sensitivity tolerance, 3 pin bayonet connector |
| 766-35 | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, high frequency, case isolated, 100 mV/g, 10% sensitivity tolerance, 3 pin bayonet connector |
| 993A-3 | Amphenol Wilcoxon | 3,000 | Accelerometers Side exit, triaxial, case isolated, 1/4-28 captive screw, positioning pin, 4 pin Bendix #PC01A-8-4P (p/n R9W), 100 mV/g, 10% sensitivity tolerance |
| 993A-2 | Amphenol Wilcoxon | 3,000 | Accelerometers Side exit, triaxial, case isolated, 10-32 captive screw, positioning pin, 4 pin Bendix #PC01A-8-4P (p/n R9W), 100 mV/g, 10% sensitivity tolerance |
| 993A-5 | Amphenol Wilcoxon | 3,000 | Accelerometers Right angle connector, triaxial with 6 J98 integral straight cable, case isolated, 10-32 captive screw, positioning pin, blunt cut, 100 mV/g, +/-10% sensitivity tolerance |
