rfq@cintymcu.com
Resumo do Produto
- Número da peça
- AXT480324
- Fabricante
- Panasonic Industrial Devices
- Categoria de Produto
- Conectores de placa a placa e mezanino
- Descrição
- Board to Board & Mezzanine Connectors CONN HEADER 80 POS 0.4mm
Documentos e mídia
- Folhas de dados
- AXT480324
Atributos do produto
- Contact Material :
- Copper Alloy
- Contact Plating :
- Gold
- Current Rating :
- 300 mA
- Housing Material :
- Liquid Crystal Polymer (LCP)
- Mounting Angle :
- Vertical
- Number of Positions :
- 80 Position
- Packaging :
- Reel
- Pitch :
- 0.4 mm
- Series :
- P4S
- Termination Style :
- Solder
- Voltage Rating :
- 60 V
Descrição
Board to Board & Mezzanine Connectors CONN HEADER 80 POS 0.4mm
Preço e Aquisição
Produto Associado
Você também pode estar interessado em
| Papel | Fabricante | Estoque | Descrição |
|---|---|---|---|
| 787-500-M12-IS | Amphenol Wilcoxon | 3,000 | Accelerometers Side exit, high sensitivity, low frequency, 500 mV/g, +/-5% sensitivity tolerance, M12 connector, M6 captive bolt |
| 732AT | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, miniature, high frequency, case grounded, microdot connector, 10 mV/g, +/-5% sensitivity tolerance |
| PC420ATP-10-DA | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, True peak (85 C limited), 10 g (98 m/sec2), Dynamic Acceleration -100 mV/g, (10.2 mV/m/sec2), 1/4-28 mounting hole (stud included), 3 pin MIL-C-5015 connector. |
| PC420AR-20-DA | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, RMS, 20 g (196 m/sec2), Dynamic Acceleration -100 mV/g, (10.2 mV/m/sec2) , 1/4-28 mounting hole (stud included), 3 pin MIL-C-5015 connector. |
| 728T | Amphenol Wilcoxon | 1 | Accelerometers Top exit, low noise floor, high sensitivity, microdot connector, base isolated, 500 mV/g, 5% sensitivity tolerance |
| FXLS8972CFR1 | NXP Semiconductors | 3,000 | Accelerometers 3axis 2/4/8/16g 2X2 DFN10 |
| 777B | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, case isolated, ESD protection, BNC connector, 100 mV/g, 10% sensitivity tolerance |
| PC420VR-30 | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 105 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, RMS, 3.0 ips (76.2 mm/sec) , 1/4-28 mounting hole (stud included), MIL-C-5015 connector. |
| PC420VP-20 | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 105 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, Equivalent Peak, 2.0 ips (50.8 mm/sec), 1/4-28 mounting hole (stud included), MIL-C-5015 connector. |
| PC420AP-10 | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 105 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, Equivalent Peak, 10 g (98 m/sec2), 1/4-28 mounting hole (stud included), MIL-C-5015 connector. |
| 786-500-M12 | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, broadband high sensitivity, low frequency sensor, M12 connector, 500 mV/g, +/-5% sensitivity tolerance |
| 786LF-250 | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, extremely low frequency (0.1 Hz), MIL-C-5015 connector, case isolated, 250 mV/g, +/-5% sensitivity tolerance |
| 787-500-IS | Amphenol Wilcoxon | 3,000 | Accelerometers Side exit, high sensitivity, low frequency, case isolated, 500 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector |
| PC420VP-20-IS | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, Equivalent Peak, 2.0 ips (50.8 mm/sec), MIL-C-5015 connector. |
| PC420VR-50-EX | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional Velocity, RMS, 5.0 ips (127 mm/sec), blunt cut cable, 4 meter PVC coated leads standard, add 25.00, up to 75 meters. |
